AINEGY Special-Configuration Solar-Diesel BESS Cabinet Series

US Standard & Solis ESS Cabinet

American standard voltage and Solis platform solar-diesel BESS cabinets for hybrid microgrid, backup power and project-specific C&I energy storage applications.

AINEGY US Standard & Solis ESS Cabinet series is built for projects that require special electrical configuration instead of a general solar-diesel cabinet. The series covers 230Vac and 480Vac three-phase American standard voltage BESS cabinets for 480V commercial battery storage projects, plus Solis series cabinets integrating Deye / Solis inverter and EMS architecture for PV, battery, grid/mains and diesel generator coordination.

View Series Options Send Project Requirements

AINEGY US Standard and Solis ESS Cabinet series

230Vac / 480VacAmerican standard voltage configuration for three-phase projects.

Deye / Solis EMSSolis platform integration for hybrid storage projects.

PV + Diesel + BatteryMulti-source power coordination for C&I applications.

US Standard and Solis ESS Cabinet Series

The product entrance is divided into American standard voltage cabinets and Solis series cabinets, so visitors can choose by site voltage, inverter platform, cooling method and project capacity.

US Standard ESS Cabinet Models

230Vac and 480Vac three-phase solar-diesel BESS cabinet options for projects requiring American standard voltage, 480V commercial battery storage, isolation transformer design and generator coordination.

US standard low-voltage solar-diesel BESS cabinet 25kW 48kWh and 25kW 64kWh

LV Solar-Diesel BESS Cabinet / US Standard

25kW/48kWh · 25kW/64kWh

Compact 230Vac three-phase LV solar-diesel BESS cabinet with 48V LiFePO4 battery architecture, integrated EMS display and electrical isolation design.

230Vac 3-Phase48V LiFePO4Isolation TransformerIP20

View Product Details→

US standard air-cooled solar-diesel BESS cabinet 30kW 65kWh, 50kW 100kWh and 60kW 120kWh

Solar-Diesel BESS Cabinet / Air Cooling / US Standard

30kW/65kWh · 50kW/100kWh · 60kW/120kWh

Air-cooled American standard voltage BESS cabinet for small and mid-size C&I hybrid projects using PV, battery, mains input and diesel generator backup.

230Vac 3-Phase<20ms SwitchingFire ProtectionAir Cooling

View Product Details→

Solar-Diesel BESS Cabinet / Air Cooling / US Standard

125kW/241kWh

Higher-power air-cooled cabinet supporting 230Vac and 480Vac project configuration, MPPT, generator port and multiple-unit expansion.

230Vac / 480VacMPPT + Generator PortParallel SupportAir Cooling

View Product Details→

Solar-Diesel BESS Cabinet / Liquid Cooling / US Standard

125kW/261kWh

Liquid-cooled 230Vac and 480Vac solar-diesel BESS cabinet for outdoor projects requiring IP65 protection and stable thermal management.

230Vac / 480VacLiquid CoolingIP65Isolation Transformer

View Product Details→

Solis Series BESS Cabinets

Solis series cabinets focus on built-in hybrid inverter architecture, Deye / Solis inverter and EMS integration, PV oversizing support and fast source switching for platform-specific hybrid projects.

Solis series liquid-cooled solar-diesel BESS cabinet 100kW 209kWh and 125kW 261kWh

Solar-Diesel BESS Cabinet / Solis Series / Liquid Cooling

100kW/209kWh · 125kW/261kWh

Liquid-cooled Solis series cabinet with built-in hybrid inverter, long lifespan design, anti-theft cabinet structure and Deye / Solis inverter plus EMS integration.

Solis SeriesDeye / Solis EMS2x PV OversizeLiquid Cooling

View Product Details→

Solis series air-cooled solar-diesel BESS cabinet 50kW 100kWh, 100kW 201kWh and 100kW 241kWh

Solar-Diesel BESS Cabinet / Solis Series / Air Cooling

50kW/100kWh · 100kW/201kWh · 100kW/241kWh

Air-cooled Solis series solar-diesel BESS cabinet for C&I hybrid power projects requiring inverter-platform integration and parallel support.

Solis SeriesBuilt-in Hybrid Inverter<20ms SwitchingParallel Support

View Product Details→

US Standard and Solis ESS cabinet PV battery grid diesel hybrid power system logic

How These Cabinets Fit Hybrid Power Projects

The US Standard series is selected when site electrical standards are the first constraint. The Solis series is selected when inverter and EMS platform are the first constraint. Both directions can coordinate solar input, battery energy storage, mains input and diesel generator backup according to the project operation strategy.

PV InputSolar generation can supply site loads and charge the battery according to EMS strategy.

Battery StorageLiFePO4 battery capacity provides energy buffering, backup runtime and load-side support.

Mains or Utility InputUsed when the site requires external power support or hybrid operating modes.

Diesel Generator BackupGenerator connection can be reviewed for backup charging and power continuity.

Source SwitchingSelected products support fast switching to help maintain power continuity for critical loads.

EMS CoordinationEnergy management coordinates PV, battery, mains and generator behavior inside the system.

Choose by Project Requirement

This category should guide customers by configuration requirement rather than only by kW and kWh. The right series depends on voltage standard, inverter platform, installation environment and hybrid source strategy.

US Standard VoltageChoose this direction when the project requires 230Vac or 480Vac three-phase electrical configuration.Focus: Site Voltage

Solis / Deye PlatformChoose this direction when the project specifies Deye / Solis inverter and EMS architecture.Focus: Inverter Platform

Indoor or Compact LVReview the LV 25kW cabinet when compact 48V battery architecture and IP20 installation fit the project.Focus: Compact Cabinet

Outdoor Higher CapacityReview air-cooled or liquid-cooled cabinets when the site needs higher power, IP65 protection or thermal stability.Focus: Cooling and Capacity

Typical Applications

US Standard & Solis ESS cabinets are used when the project needs a special voltage cabinet, a specified inverter platform or coordinated PV, battery, mains and diesel generator operation.

North American C&I SitesFor commercial and industrial projects requiring American standard voltage configuration.

230Vac / 480Vac FacilitiesFor facilities where three-phase voltage configuration is the main selection condition.

Hybrid Microgrid ProjectsFor PV, battery, mains and generator power coordination in distributed energy sites.

Farms and Rural FacilitiesFor sites requiring solar storage and diesel generator support under weak-grid conditions.

Solis / Deye Platform ProjectsFor customers specifying Deye / Solis inverter and EMS integration in the cabinet.

Backup Power for Critical LoadsFor projects needing fast source switching and battery-supported load continuity.

US Standard and Solis ESS cabinet commercial hybrid power applications

Configuration Items

To configure a US Standard or Solis ESS cabinet, start from electrical standard and platform requirement, then confirm load power, PV input, generator backup and installation environment.

Voltage StandardConfirm whether the site requires 230Vac, 480Vac or another three-phase project configuration.

Inverter PlatformConfirm whether Deye / Solis inverter and EMS architecture is required by the customer or project.

Load PowerDefine peak load, continuous load and critical load to select the correct cabinet power rating.

Battery CapacitySelect 48kWh, 64kWh, 65kWh, 100kWh, 120kWh, 201kWh, 209kWh, 241kWh or 261kWh according to runtime needs.

PV CapacityConfirm PV input size, MPPT requirement and whether PV oversizing is needed for the project.

Generator CapacityMatch diesel generator power with backup strategy, charging behavior and critical load requirements.

Cooling MethodChoose air cooling or liquid cooling based on cabinet model, capacity, site temperature and installation conditions.

Protection LevelReview IP20 or IP65 direction according to indoor cabinet use, outdoor installation and site environment.

FAQ

Common questions about AINEGY US Standard & Solis ESS Cabinet selection, project positioning and configuration.

What is a US Standard & Solis ESS Cabinet?It is a special-configuration solar-diesel BESS cabinet series covering American standard voltage cabinets and Solis / Deye inverter platform cabinets.

How is this page different from the solar-diesel ESS cabinet page?This page focuses on 230Vac / 480Vac project voltage and Solis / Deye platform integration, while the broader solar-diesel page covers the general hybrid cabinet family.

Does the series support American standard voltage?Selected US standard models support 230Vac and 480Vac three-phase project configuration depending on model and system design.

What is the Solis series used for?The Solis series is used when the project requires Deye / Solis inverter and EMS integration inside the solar-diesel BESS cabinet.

Can the cabinet coordinate PV, grid and diesel generator?Yes. The cabinet can be configured for PV input, battery storage, mains input and diesel generator backup according to project requirements.

Which cooling type should I choose?Air cooling is suitable for many C&I cabinet projects, while liquid cooling is preferred when capacity, outdoor conditions or thermal control requirements are higher.

Can multiple cabinets operate together?Selected models support multiple units in parallel when the project needs higher output power, larger capacity or expanded hybrid microgrid operation.

What information is needed for selection?Provide site voltage, load power, daily energy use, PV capacity, diesel generator capacity, inverter platform requirement and installation environment.

Need a US Standard or Solis ESS Cabinet Configuration?

Tell us your site voltage, load power, PV capacity, diesel generator capacity, required inverter platform, backup duration and installation environment. AINEGY will help match the right US Standard or Solis solar-diesel BESS cabinet configuration.

Contact Our Technical Team Back to C&I ESS